|
| When you click on the software download link the following message is displayed:
This update for GS2 Harvest Doc is only recommended for customers who will be harvesting before August 1st. If you will not be harvesting before August 1st it is highly recommended NOT to download this update, for the update will limit your GS2 functionality.
This update is a harvest version only for combines, which will allow customers to document harvest operations and use guidance features.
GS2 Harvest Doc is only compatible with combines with grain tank moisture sensors and requires Harvest Monitor software 112E, which is included in this download.
-------
To further elucidate the limitations....
1. The need to reprogram - When done harvesting, you must reprogram the display to the previous software version.
2. Difference is values - You may see small differences in values shown in the display versus Apex 1.3.
3. Mapping delay - Painting of the on screen mapping is 10 to 20 seconds behind actual harvest recording.
4. Variety locator - This function is available, but not functioning correctly.
In-field operation issues....
1. Recording will not turn on unless the machine has forward movement when the feeder house is lowered.
2. Units of measure may display in something other than bushels. It is, however, recording bushels.
3. Unswitched power on a combine is turned off 1 to 2 minutes after the key is switched off. Because of this you will need to change the map foreground setting to yield or moisture every time the machine has been powered off before the on-screen mapping will display.
-snarf | |
|
G*2 Harvest Doc
