|
| 1st - Verify that your foam drive wheel is not slipping on the steering wheel...This will cause performance issues.
2nd - The T2 Controller needs to be lined up with the connectors forward, back or down and not at diagonal...get as close as reasonably possible. This can cause some offline issues on side hills.
3rd - Angle / Turn - Lower this # if you are not getting online quickly. If you are 30" offline and parallel you should be within 3" within about 12 seconds. If it takes longer then lower the Angle / Turn and try it again.
4th - Antenna to Axle Position - Verify that you are correct on this distance. If you have the setting far forward on the cab you may want to try 0" as well. This may assist getting it online quicker.
| |
|