|
| TJH, I know your frustrations. I have an EZ Steer in a 2388 and at first I was ready to give up. I toyed with it for some time and finally got it to work. Actually very well for a combine. It isn't nearly as smooth as tractor installed, but much better than I can do. I do notice that as my ground speed increases in weaves a little more, but never gets offline more than + or - 4". Make sure your T2 controller is mounted solid, I had problems with mine at first. I also had problems with the foam wheel slipping, but a steering wheel cover and closer adjustment of the motor fixed that. Here are my settings for comparison:
T2 Orientation = Floor
T2 Roll offset = .06L
Antenna/Axle offsett = 40" Forward
Steering wheel diameter = 14"
Angle / turn = 20 degrees
Freeplay right = 0.2"
Freeplay left = 0
Antenna height = 164"
Online aggressiveness = 115%
Approach aggressiveness = 110%
Override sensitivity = 10
| |
|
ez-steer not so ez
