Viewing a thread - Building Gates

Forums | Classifieds (59) | Skins | Language

You are logged in as a guest. ( logon | register )

Building Gates - notch, flatten??	View previous thread :: View next thread
Forums List -> Stock Talk	Message format

cr39

Posted 12/27/2011 18:12 (#2127249 - in reply to #2126744)
Subject: RE: Building Gates - notch, flatten??

I built some heavy gates out of 1 1/2 inch pipe last winter. I just layed the end of pipe on a steel block and pounded it flat with a hammer on both ends. Then I welded both sides with a wire welder. One of the gates was used as the swing gate in a tub and worked fine. I bet the gates will last a long time.

Building Gates - notch, flatten?? - crazyportage : 12/27/2011 12:15
- Re: Building Gates - notch, flatten?? - 801486 : 12/27/2011 12:23
  - Re: Building Gates - notch, flatten?? - ttop : 12/28/2011 17:52
- Re: Building Gates - notch, flatten?? - garvo : 12/27/2011 13:10
  - Re: Building Gates - notch, flatten?? - johndeere1 : 12/27/2011 13:49
- Re: Building Gates - notch, flatten?? - ccjersey : 12/27/2011 14:24
- RE: Building Gates - notch, flatten?? - cr39 : 12/27/2011 18:12
- RE: Building Gates - notch, flatten?? - Dave Cen.Ia : 12/27/2011 18:53
- Re: Building Gates - notch, flatten?? - FONZIE : 12/27/2011 21:59
  - Re: Building Gates - notch, flatten?? - skytalker : 12/28/2011 21:39
    - Re: Building Gates - notch, flatten?? - Spike in WI : 12/29/2011 20:05
- RE: Building Gates - notch, flatten?? - Tim in WI : 12/27/2011 23:02
- Re: Building Gates - notch, flatten?? - garvo : 12/28/2011 08:24
- RE: Building Gates - notch, flatten?? - pjt : 12/28/2011 18:09
- RE: Building Gates - notch, flatten?? - NoTill1825 : 12/30/2011 07:38

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)