|
| We have a Trimble nav2 controller with a Fieldmanager display. This is running on an RTK network. The problem we have is pulling our sprayer. At speeds above 6.5 to 7.0 mph the setup starts hunting for the line and the divergence gets bigger with speed. We are running in 22 inch rows with 15inch tires and tracks. The sprayer has a 132 ft boom and 1600 gallon tank--full or empty the problem is still there.
Last year we ran a tractor with similiar equipement on it and could operate 10+ mph.
The GPS wizard cannot seem to find a correct adjustment to straighten this out--low aggresivness is better-if that setting is increased beyond 55 or 60 things get bad fast.
Any ideas?? | |
|
S turns with an 8100 JD
