|
Casey Illinois | I understand what you are saying about the A B line on rows, My problem was pre-plant NH3 and also the field cultivator, and the swath would vary between 0 and 15 feet before reaching the other end of field. Also on rows it would just take off on its own. I understand the A B line accumulating with each pass, If I would follow it I would have skips, overlaps and whatever it wanted to do. Since the new update I received in late May, by problem is solved. Talked to my CIH dealer and the CIH rep was not very helpful, talked to the Trimble man and he had the cure to fix the problem. My salesman does not remember the update number but thinks (instead of 4.10 it might be 4.11.) There is a fix out there,and there is a problem, if not one can go back to the old 3. something. | |
|
EZG + 4.10 firmware glitch ?
