|
roaming | If you're sure that the washing machine will never be relocated (well, never say never, but...). Mark the location of the feet with the machine in place, then move the machine and use a large Forschner bit to drill shallow blind holes at those 4 locations. They just need to be deep enough for the feet to set in; 1/4" should be plenty.
I have a concrete floor in our laundry room, and our machine walked as well, so I put it up on 2x4 blocks glued to the floor, with depressions drilled in the blocks as described above. No more problems. | |
|
walking washing machine
