|
Jewell County KS | Thanks
Dad and I built it. We started out with a round bale rack made of square tubing for a 16' straight truck and ended up with this. Had to buy the winch and pulleys, 4-4x10" 14 ga sheets and a little more 2" square to finish it and the 2 panels behind it. Plus 4 gallons of paint. Everything else was sourced from the scrap pile. The floor is a rubber plank material that I helped dad put in our old portable loading chute 25 years ago. The floor was still in excellent shape so the chute was scraped and the floor donated for the cause.
Probably got $6-$700 in it plus a little time and mig wire. I priced a new one somewhat similiar last year at $7000
Matt
Edited by ks8780 4/3/2011 20:56
| |
|
Finally got my loading chute done...pics
