|
Sunnyvale, CA | Connect the pulse amplifier 56328 to the EZ-Guide Plus, then connect cable 52033 to the pulse amplifier, then connect the radar adapter cable to 52033 cable. in the EZ-Guide Plus setup screen, Lightbar, pulse output, turn Rate to the pulse rate corresponding to the radar gun you are replacing, there are several choices that correspond to common radar gun types. then and choose an angle. the angle is the same angle as your radar gun might have been. 0 degrees is default. changing the angle will change the pulse rate scale factor, just as for a real radar gun. | |
|
EZ-Steer and JD250 monitor
