|
SC WI | No base kit. Bought vapplys, expansion hubs, cables, flowsense and plugged it all in. Everything used except a few of the cables. Just run pump high enough to satisfy your max flow needed. Vapply will regulate flow and do sections. Our electric pump has a 60psi cutout built in. Just shuts itself off when not needed.
Vdrive plug goes into expansion hub. 16" cable from expansion hub to Vdrive motor and 50" cable from hub to frame in front of row unit to Vapply.
Edited by farmer_white 4/20/2024 12:18
| |
|