|
| New to this Insight monitor, went to connect with a 6500 and am not able to get any connection with the GPS settings on the insight. I went to ag leader portal and found the attached process that claims I can use the two port cable part number 4004175-18. It claims that port A needs to be reprogrammed. What does it take to complete this reprogram process?
I plugged the port A into the main harness running to the insight (part number 4002016-12) I get lights on the 6500 but in the GPS settings on the Insight it all continues to be “greyed out”. I have pressed the button to force communication and it still does not work.
Any help/knowledge on this would be greatly appreciated, again I am new to this so hopefully I am not missing anything too obvious.
Edited by GFarmsIA 4/18/2024 20:21
(IMG_9381 (full).jpeg)
(IMG_9383 (full).jpeg)
(IMG_9386 (full).jpeg)
(IMG_9385 (full).jpeg)
(IMG_9382 (full).jpeg)
(IMG_9384 (full).jpeg)
(IMG_9380 (full).jpeg)
Attachments ---------------- IMG_9381 (full).jpeg (139KB - 6 downloads) IMG_9383 (full).jpeg (77KB - 5 downloads) IMG_9386 (full).jpeg (96KB - 5 downloads) IMG_9385 (full).jpeg (188KB - 8 downloads) IMG_9382 (full).jpeg (124KB - 3 downloads) IMG_9384 (full).jpeg (81KB - 5 downloads) IMG_9380 (full).jpeg (175KB - 2 downloads)
| |
|