|
McCanna, ND | I don’t think that 4 pin deutsch connector should be used, if anything I would think the CAN 1 terminator needs to be relocated to there.
It appears the antisense takes the serial message from the dual key and converts it to the proper message format and plugs into the field view drive.
Here’s some reading material
https://support.climate.com/kt#/kA02A000000UA04SAG/en_US
 (IMG_2777 (full).png)
Attachments
----------------
 IMG_2777 (full).png (115KB - 5 downloads)
| |
|
FieldView and TopCon X35
