| ShopTeacher - 4/18/2024 07:07
Try cleaning battery connections really good. You mentioned new batteries. I’ve seen many times when battery connections are loosened and retightened but don’t make good contact after being reconnected. Worked before they were taken apart, but not after.
If this is not a new installation (system that has run previous seasons) I’m suspecting a power connection issue.
Put a volt meter on a large gray module plug(s) back by the modules when you power the clutches and see what you get vs when the clutches are not powered.
Agree. Typically its a power supply issue. Check battery connections.
I've had the eyelets on the Ag Leader cables at the battery vibrate or get bent around enough to break or partially break them.
Same with fuse holders. |