|
sleepy hollow , wi | some depends on how thick of belt you have most common farm conveyor belts are gonna be 1/8-3/16 so 125 splice works best. there's #62 for thinner and 187 for thicker whether you use galvanize or stainless is for the material you're handling to decide, fertilizer go stainless forage with salt and minerals, stainless . seed and feed can use galvanized. local guy wanted an 18 inch alligator machine , it priced out from 1800 to 3k depending on the site. I had enough parts around that I built him a used 1 with new combs. it takes a little longer but if you get a 2 block machine ,punch,skyver and machine the price aint too bad, its all I carry in my truck. the blocks are flippable to either 125 and 187 or 125 and 62, decide what belt thicknesses fit for you, we have a clipper roller but once you go over the 15 inch size of the machine on belt its tricky to keep it all lined up, and that machines expensive | |
|
Conveyor belt repair
