Posted 4/17/2024 21:09 (#10710734 - in reply to #10710671) Subject: RE: Raven Cruizer 2 to raven scs 440
Freeburg IL
I think a baud rate of 19200 should work. All the others on a cruiser are set at zero, or left side of the slide. Anything greater than zero will work. Once you have speed on your 440, you need to calibrate it. Measure off a few hundred feet and drive it. Change speed cal on 440 until distance driven is equal to distance displayed on 440.
Raven Cruizer 2 to raven scs 440
