|
jasper county , IL | First thing I would do is to unhook the lift and lower lines going to the planter and plug them to eliminate a leak on the planter. Them move lever to lift and lower as you have been doing. If it still leaks problem is in valve if it stops problem is with planter side. If no leak from valve then hook planter lines back up as it is most likely a cylinder leaking internally. Then unhook all the lift hoses at each cylinder and move lever to lower if air comes out of one or more cylinders is bad if no leak hook hoses back up and disconnect all lower hoses and move lever to lift and if air comes out a cylinder fitting you have found your bad one or could potentially be more than one.
You are sure you have the lines hooked u correctly where three lines go to the control box?
Edited by hoghunter 4/14/2024 18:02
| |
|
Precision Clean Sweep valve leaking
