Eastern WA | Shimmy1 - 3/29/2024 13:28
Agree with some others. I haven't done it, but what makes more sense is a sealed box on each implement with a few of the most likely sizes for most frequent situations, whether that's a couple different pairs of wrenches, a ratchet and a few sockets, etc.
Then the tractor box only needs the usual suspects: large and small hammer, couple prybars, couple crescent wrenches, visegrips, 4-in-1 screwdriver, done.
That’s what we did on the drills and weeders. Big ammo cans to hold spare wear parts and chains. Seals the dust out but the condensation can get things a little rusty in there. |