central iowa | TORQUE - 3/25/2024 19:45
I have Rawson drives run with an Integra, afraid of repair/replacement availability. There are lots of takeoff JD and CaseIH drives available. What would it take to convert to one of these? One model or brand better than the others?
Really any of them can be made to work, but probably easiest if you find some from the same model planter you have since mounting will be quicker and easier. You will need a hydraulic drive module and the cables to make it hook up in place of your existing Rawson module and wiring. Then make a new configuration in integra and you are good to go. Or you could pick up a used Rawson to kick the can down the road a bit before you have to do anything. (Happen to have a new one in the classifieds). All depends on if you want to make a small investment that may get you down the road for quite a while, or suck it up and go to a more permanent solution |