|
NW KS | From what I am reading in the spec sheets it looks like the answer is yes. What I found in the data sheets show it can provide either an ntrip caster or ntrip sever. Ntrip caster is the one you connect to with the rover. Ntrip server connects to a caster to distribute the information. If you want to host and setup everything yourself you will want the caster setup. You need to make sure you have a public ip address that you can enable port forwarding on. If it is a dynamic ip address you will need a dynamic dns service setup to update a url everytime your ip changes. If you don't have the ability to setup port forwarding you can use the server setup to upload to rtk2go. Since it is upload only minimum network setup is needed. Url link is some information on setting up another trimble base. I couldn't find to much with a quick search on the r750.
https://www.geonovus.lt/sites/default/files/trimble_r12_gnss_receive... | |
|
Base station
