LittleOleFarmer - 3/24/2024 15:46 Yes tractor and implement are there and their settings. I’ve even checked the offsets on them. All documentation that I can see is filled out. Field, client, farm, product, rate to be applied, everything is there. I’ve never performed any tests on the rate controller but there are a couple. But it’s putting out anhydrous just like it should. The controller is counting acres and volume used when you go into ISOBUS VT and look that way. Just still nothing on the tractor and display end. It ran flawlessly the last week of February when I tested everything when it still had the 2630 display.