|
| I just purchased a vintage Kenwood home stereo receiver and also an equalizer,,,how do you wire the 2 together to get the most out of them? The system my boss has here at the shop the output of the receiver goes to the input of the equalizer, then back out the output of the equalizer to inputs on the receiver, then speaker wires are coming from the speaker wire jacks. Mine is different or labeled different and I’m not sure how to connect everything properly.
First pic is the front of the receiver.
Second pic is the back of receiver with all the jacks available.
Third pic is the front of the equalizer.
Fourth pic is the back of the equalizer with its jacks.
 (53B2753A-9EBC-4D66-8686-66836B308626 (full).jpeg)
 (1E002E9E-726B-4D74-85DC-0D53C07A6F5A (full).jpeg)
 (077AD40A-300A-4B37-9772-40A1AF1293B3 (full).jpeg)
 (98D9BF63-D6B8-44E9-96DF-96328CB17AB5 (full).jpeg)
Attachments
----------------
 53B2753A-9EBC-4D66-8686-66836B308626 (full).jpeg (73KB - 52 downloads)
1E002E9E-726B-4D74-85DC-0D53C07A6F5A (full).jpeg (79KB - 58 downloads)
077AD40A-300A-4B37-9772-40A1AF1293B3 (full).jpeg (58KB - 50 downloads)
98D9BF63-D6B8-44E9-96DF-96328CB17AB5 (full).jpeg (154KB - 48 downloads)
| |
|
HiFi stereo receiver/tuner specialist/geeks
