Posted 3/3/2024 11:22 (#10649531 - in reply to #10647218) Subject: RE: 20-20 compatibility with Deere’s globe
Southern Illinois
The 20/20 uses serial NMEA gps messages. You can get that from the Deere receiver. You just need to set the baud rate on both units to the same speed.
The newer Deere receivers run their CAN bus at 2x the ISO standard speed. So interfacing with reading CAN gps could be a problem for some devices but most all have serial cable inputs anyway.
20-20 compatibility with Deere’s globe
