|
Southern Illinois | You need to look for the model number on the receiver. Black enclosure receivers could be several models.
What you might hope to find is a Phoenix 300. Then the internal receiver board can be determined by looking to see if there is a USB port on the rear panel. No USB port P300 uses a novatel oemV-3. These work fine but may not be supportable as far as unlocks anymore. The oemV-3 was used in novatel MR10 and MR15 and Leica models among others. A P300 with USB port uses a novatel oem628 receiver board. These are the same as an AgLeader 6500 used. It may still be possible to get unlocks for these but I don't know for certain. | |
|
|