I'm jumping from a 2630 to a GS5+ on a John Deere 8120 and 2012 1770NT (1A01770PTAM740184) planter.  Today I pulled the planter out of cold storage and the planter would only come up on the VT terminal instead of the way it came up on the 2630.  All the functions worked as it should.  I then attached a 3000 globe to the tractor and it immediately appeared in the VT terminal also.  

Does anyone have any idea what is going on here?  

I don't know if there is any current software update for the planter.  I have included a picture of the current software on the planter tab.  When we purchased it in 2018 we had the latest software installed then but it's been awhile and worked great for us. 

This is the first tractor and implement the GS5 has been attached to.  I updated the software on the monitor in the office to 23-2.

I'm headed to the dealer tomorrow but thought I would ask here.  Usually AgTalk trumps the dealer on problems like this.

(IMG_9248 (full).jpg)

(IMG_9249 (full).jpg)

IMG_9248 (full).jpg (65KB - 56 downloads)

IMG_9249 (full).jpg (70KB - 51 downloads)