Posted 1/26/2024 06:57 (#10593822 - in reply to #10593061) Subject: RE: Removing a pro 600 from a 7088 combine
WCMO
I removed the pro600 from our 7088 and put an incommand in for yield monitoring and am happy with the choice. The only time I think I miss it has been trying to diagnose header control issues. I believe the pro600 would show voltage at the sensors on the head and now I have to use a head sight tester or a volt meter to do that, but that's minor compared to the improved yield monitoring of the incommand.
Removing a pro 600 from a 7088 combine
