|
SW MN | 665B could have a bang bang valve (servo) or PWM type depending on how old machine is. If I remember right if machine had bulkhead, round connector built in roof for receiver then it newer valve and if have deutsch 8 pin and two pin older valve. And just to clarify there were no beeline kits for these as a beeline kit has blue box on floor with all components in and auto guide all common roof. Some of same components but different. If newer valve then can use other guidance systems and will have sasa sensor on colum for override and if older valve it will have pressure switch. | |
|
|
Challenger MT665B factory Beeline autosteer, manual override.
