Viewing a thread - implement offsets when using NEMA from nav

Forums | Classifieds (112) | Skins | Language

You are logged in as a guest. ( logon | register )

implement offsets when using NEMA from nav	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

farminsmall

Posted 12/29/2023 15:40 (#10547665 - in reply to #10546717)
Subject: RE: implement offsets when using NEMA from nav

swmn

NMEA signal is corrected to the rear axle on a fixed frame tractor, and front axle on an articulated when pulling out of the nav connector. If you are pulling direct out of a 372 or 262 there is no offset.

implement offsets when using NEMA from nav - glfarms : 12/28/2023 22:56
- RE: implement offsets when using NEMA from nav - Joe@RFDG : 12/29/2023 11:55
- RE: implement offsets when using NEMA from nav - farminsmall : 12/29/2023 15:40
  - RE: implement offsets when using NEMA from nav - glfarms : 12/29/2023 15:46
    - RE: implement offsets when using NEMA from nav - farminsmall : 12/29/2023 16:04
      - RE: implement offsets when using NEMA from nav - glfarms : 12/29/2023 16:33
        
        RE: implement offsets when using NEMA from nav - Joe@RFDG : 12/29/2023 16:36
        
        RE: implement offsets when using NEMA from nav - glfarms : 12/29/2023 17:03

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)