AgTalk Home
AgTalk Home
Search Forums | Classifieds (120) | Skins | Language
You are logged in as a guest. ( logon | register )

Spray nozzles for Enlist/Liberty mix
View previous thread :: View next thread
   Forums List -> Crop TalkMessage format
 
SimpleJoe
Posted 12/7/2023 18:17 (#10514535 - in reply to #10514415)
Subject: RE: Spray nozzles for Enlist/Liberty mix


NW Illinois
I have not seen those on a machine or in action myself, so unsure about how they work. Spent most of the last 15 years of my career buried in the ULD and the Greanleaf TDXL nozzles. They are both very course at the lower end of the pressure spectrum. On Greenleaf front, they have a TDXL and a TDXL-D. They are a 2 piece design. First is the metering part, second is the nozzle. Watch out is a TDXL in say an 05 nozzle has a 05 metering body and what they originally introduced the nozzle with as the second part. To make the TDXL-D(dicamba version) all they did on say the same 05 nozzle was use the same 05 metering body, then they put an 06 nozzle body cap on it. Basically making it even more course of a spray pattern to comply with their special requirements.
I’m inclined to use the AIXR. I bought a set to run pre burndown to see if I think overall pattern would be better on what little Liberty I will spray in ‘24.

Edited by SimpleJoe 12/7/2023 18:52
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)