|
| Do you know for sure that it is not planting? Did you check to see if there are seeds in the ground? Is the vDrive motor plugged in? You have to first determine if you have a meter issue or problem with the sensor counting seed. The vdrive motor should have red light that is blinking (same blink pattern as the other rows). Look at the vDrive diagnostic page to see the command population, meter rpm, etc. You can also raise up the planter and hold the meter loading switches up and it will run the meters for you to see if seed is coming out.
Start systematically swapping components with another row to see if the problem follows. | |
|