AgTalk Home
AgTalk Home
Search Forums | Classifieds (188) | Skins | Language
You are logged in as a guest. ( logon | register )

InCommand needing multiproduct unlock for 1790 after 8.1 update?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 4/27/2023 08:18 (#10205247 - in reply to #10205164)
Subject: RE: InCommand needing multiproduct unlock for 1790 after 8.1 update?


Near Intersection of I-35 & I-90 Southern Mn.
I would be very surprised that a change in the need for the multi-product unlock has come about with V 8.1.

I don't have experience with a 1790 (have 1770 ground drive) or SeedStar. All my dealings have been with Ag Leader modules.

When I worked as a Tech and even on my own personal Ag Leader stuff, sometimes I ran into confusion. I have found that starting completely over with a new configuration for the implement and every associated part magically healed my problem. I started over with all portions of the setup even though I knew they were correct. Most times, the problem went away due to some misunderstanding on my part.



Edited by tedbear 4/27/2023 08:33
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)