ND | bkandra - 7/3/2022 07:35
Pretty sure you will have to replace the line and the "bullet" (part no. RE509416) that goes into the block. I have done 2 and that was the fix. You might get by with just one or the other, but once you tighten them down, they pretty much conform to each other.
Which cylinder? I was told that Number 2 is the most common, and that is what it was for both of mine.
What he said, also make sure the clamps for the injector lines are in good shape and tight. |
JD 8.1 leaking injector
