Near Intersection of I-35 & I-90 Southern Mn. | It is quite likely that the settings are no longer correct if the GPS had an update. I use an InCommand 1200 with an Ag Leader GPS 6500. I have the radar out setting turned ON to feed speed information to the tractor dash. If I do a GPS update, I have to reenter the code for the radar speed out as it gets turned back off with an update. This is a one time procedure as long as I remember to "save it".
I suspect the same thing might happen with the NEMA out strings. The Deere side (which I'm not familiar with) may need different NEMA strings than the default. If you change them remember to "save" them otherwise you may need to reenter them every day.
Edited by tedbear 6/3/2022 07:40
|