|
SESD | Seems like it would be in the population alarms settings. Should be accessed by the small "settings" wrench to the right of the the bar graph at the bottom center of the regular run screen, or if you're watching the advanced seed tube monitor on split screen it would be in the upper right under the satellite icon. Either of those wrenches should bring up a window to look at the planter options. Center tab at the top is Seed Monitor. Then click Population Alarms to make sure the low and high are set to anything less than zero. As long as you're on the Seed Monitor tab you'd want to click on Sensor Configuration button to make sure all the sensors are enabled. | |
|
AgLeader Sureforce - no alarm when seed box runs out
