|
| When rebuilding some 955 row units, I was unable to remove most of the depth indicator pins without twisting them off. Had to drill out the broken section, no problem. Went to get replacement pins, they just look like a small 1/8" rivet with a round head, they told me they were @7$ a pin, I said you got be kidding, no laughter. I said can you put in a price request and make sure it isn't 70 cents. They did, no it was 7$. Went to local hardware store and bought some #12 machine screws and a tap and repaired them that way. Must be a company in trouble. | |
|
GRRRRRRR!!!! CNH Parts (same scenario as below)
