|
Northern Illinois | I puchased a JD PTO kit with radiator pump used off a 1760 planter. I want to install it on my 1770. Since everything was dis-assembled, I'm confused on the correct hose and valve combination. There are three lines coming off the PTO pump. I have identified the pressue and vacuum return. I have not identified the third line. The radiator has a T so there are three fittings. The filter is just in and out, and the needle valve to adjust the vacuum has a one-port and a second port has a T. Can someone help me trace out what goes first and where the T-line should go?
I'd like to get this mounted up so I can plant corn tomorrow morning. Thank you for your help. | |
|
Help hooking PTO pump to a planter
