|
North Western Alberta | One thing I have seen guys here do, is install a hyrdaullic oil cooler from an old tractor, or windrower, or whatever, on the return line off the fan motor. They install the cooler over the inlet of the fan, on the seed tool, so that lots of cool air is going through the cooler. Not sure if I explained that right, but... Anyways.... Return line off the hydraulic motor that powers the fan, goes to a hyrualic oil cooler that is mounted so the fan has to suck through it.. and then the oil just discharges back to the system like normal. My neighbour spaced the cooler about an inch away from the fan, so the fan could still suck unrestricted air, but definately had to pull some through the cooler as well. I bet you that would help you out big time. | |
|