AgTalk Home
AgTalk Home
Search Forums | Classifieds (34) | Skins | Language
You are logged in as a guest. ( logon | register )

nh3 - auto shut off systems
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
bob_55
Posted 12/13/2006 21:28 (#73440 - in reply to #73266)
Subject: Re: nh3 - auto shut off systems


Do you currently have a controller?
If you have a Raven controller, The EnVizio Plus w/AccuBoom will "T" in right behind the console and control your shut-off's. The New EnVizio Plus software (v2.0) will also data log from the console (needs a serial port on back). It will log: rate, target rate, speed, elevation, time, and course over ground. Because the serial port sends out the boom status the EnVizio will paint each section now...before it was either all ON or all OFF. If you already have GPS with your autosteer, you can use that to feed the EnVizio.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)