|
| did you check your o-rings in your cooler sounds like this is the problem. Also try to run water through the 3/8 line that bypass nh3 back to the cooler if it won't go in the tube in the cooler is plugged. I have used fast close valves for 6 or 7 years from 75 to 200 pounds. One other thing is the valve can get corroded inside and stick when trying to open and close itself I have seen this before also. Take valve apart and spray with penetrating oil. Filling the system with k1 or diesel after season will prevent this. Check those o-rings in cooler I am betting thats it. Save the money on the on off valve it is NOT the problem. Good luck! | |
|