|
| Hi,
i own a ipaq rx3100 and i tried to connect the switch for logging. I receive the GPS signal correctly. I use the trimble switch cardle but that doesn't work. I tried to do my own cable (9pin 7CTS - 8RTS connect together to log) but that doesn't work. Does someone have done something similar... Here the detail connection :
PocketPC GPS
1 1
2 2
3 to GPS 4 3 Rx
4 4 Tx
5 to GPS 5 5 Signal GRD
6
7 tied with 8 from PocketPC (the switch connect between those two wires)
8
9
| |
|
Logswitch on ez-map
