|
NW IL | I've got an adapter cable to connect the legacy cable to my Incommand 1200 for yield monitoring. This year I'd like to run an ontrac 3 too.
I have an Incommand display cable with ethernet in a tractor. Could I pull the ethernet cable out to plug into the 1200 and bypass the legacy cable completely?
It looks like there are 2 powered connections on the ontrac3, one from battery and one in the Incommand display cable that reads "activation guidance" on a tag. So maybe it's not as simple as just getting power and direct ethernet connection??
Incommand cable is 4004671-12. Probably not a simple cable swap if I wanted to just replace the legacy cable system with the incommand? | |
|
Ontrac 3 with Lagacy display cable
