AgTalk Home
AgTalk Home
Search Forums | Classifieds (162) | Skins | Language
You are logged in as a guest. ( logon | register )

JD Gen 5 not recording coverage
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
cyclones30
Posted 3/24/2024 16:17 (#10678207 - in reply to #10678171)
Subject: RE: JD Gen 5 not recording coverage



Midwest

LittleOleFarmer - 3/24/2024 15:46 Yes tractor and implement are there and their settings. I’ve even checked the offsets on them. All documentation that I can see is filled out. Field, client, farm, product, rate to be applied, everything is there. I’ve never performed any tests on the rate controller but there are a couple. But it’s putting out anhydrous just like it should. The controller is counting acres and volume used when you go into ISOBUS VT and look that way. Just still nothing on the tractor and display end. It ran flawlessly the last week of February when I tested everything when it still had the 2630 display.


Right,  but on that right half of the work setup page (opposite the tractor and implement) what do you have? Need to have NH3 there and controller rate or Rx selected

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)