Viewing a thread - JD GS3 Too Many Implements Connected

Forums | Classifieds (137) | Skins | Language

You are logged in as a guest. ( logon | register )

JD GS3 Too Many Implements Connected	View previous thread :: View next thread
Forums List -> Precision Talk	Message format

atwfarm16

Posted 3/24/2024 07:00 (#10677489)
Subject: JD GS3 Too Many Implements Connected

Central IL

Hello

Have a 1770nt 16 row ME+ units that runs through our ISO connector on JD 8330 tractor. It has hydraulic drives and clutches 2 sections per row. Added a Smartbox+ system that runs ISO through a Mueller module. We put an ISO splitter at the hitch. When I start the tractor and GS3 up, and error comes up saying too many implements are connected. Then it makes you select either planter or 16 row which is what the Smartbox + system is called. I noticed when I select planter, I have no auto section control on the Smartbox+ system but all else functions alright. Basically it is not connected to the task controller. When I select 16 rows then Smartbox+ system works fine task controller and auto section control wise, but I am afraid the row clutches wont work, but have not been able to test that. There is some settings in multiple displays that I wonder are correct or not. The one that intrigues me is being able to change the task controller to 2 but when I try it comes up with an error that changes to the greenstar and or task controller can not completed.

Any ideas on first off if accomplishing this on a GS3 is possible and secondly if I have any settings wrong or what I am missing?

TIA