|
| Running a Gen 3 on a 16/32 Kinze 3650.
1 row consistently shows "not planting" even though it is.
Sensor has been changed. Bearing on the hopper drive have been changed. That happens to a row with a RUM on it and I have changed the RUM.
The odd part is that if I jump off the tractor and roll the meter back by hand 1 or 2 clicks until I hear seed drop and then jump back in the row will show normal until I find the headland turn around - when it will show not planting again - until I jump out again and roll the meter a click or two . . . . rinse and repeat.
It acts like that row has to be "primed" with a seed or two before it will wake up.
Ideas?
| |
|