|
| OK - an electrical issue makes more logical sense to me than a failed clutch.
The low voltage message happens often enough to be an annoyance - don't know whether I can call it 1 to 1 or not.
So the suspect is the 4 wire on Channel A? I will take a look. My Channel A is long - as I am running with an articulated tractor so the 20/20 is a long way from the Smart Connector - if I recall correctly I put an extension on it to reach when I installed it. Would the length of that run make any difference.
All that said Channel A is mostly protected and inside the frame on the planter so not a lot of places to pinch on my application.
My Smart Connector is part number725712 flat black plastic.
I most sincerely appreciate the assist - thank you.
| |
|