|
Saginaw Michigan | have an 8300 pulling a striptill tool, with an aircart. The cart has a big fan, and 2 hyd motors driving the meters. We are running autopilot autosteer. The autosteer works good for an hour or so, then it starts weaving back and forth a bit, getting worse and worse. then the tractor throws an alarm that the hyd oil is hot. i have confirmed that it is hot by burning my hand on several hoses/lines.
we are running the fan on remote 3 with flow at 10, and the drives on the power beyond
Ideas on easy things to check? the oil cooler fins and radiator are clean. we have been told to add an oil cooler onto the tool. seems like i am running more stuff on my planter and it doesnt heat up(vac motor, 2 rawsons, centrifugal pump).
-mike | |
|
8300 HOT hyd oil
