Viewing a thread - 1480 rub bars

You are logged in as a guest. ( logon | register )

1480 rub bars	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

jwab

Posted 8/6/2006 09:32 (#33144)
Subject: 1480 rub bars

western alberta

Is it really critical to shim the bars perfect? They are a little worn so it is not easy to get them all even. I measured from a refence point and would say they are within about 1/16" .

What kind of tolerances should they have, the book has nothing on setting rub bars.

Thanks Jeff

1480 rub bars - jwab : 8/6/2006 09:32
- RE: 1480 rub bars - Old Pokey : 8/6/2006 10:32
  - RE: 1480 rub bars - jwab : 8/6/2006 11:06
    - RE: 1480 rub bars - Old Pokey : 8/6/2006 11:51
      - If Old Pokey says it, I'll take it as fact. - Grasseed : 8/6/2006 11:53
        
        Awe shucks.:-) - Old Pokey : 8/6/2006 12:12
      - RE: 1480 rub bars - jwab : 8/6/2006 12:01
        
        Re: 1480 rub bars - Jon Hagen : 8/6/2006 13:08
        
        Re: 1480 rub bars - jwab : 8/6/2006 13:36
- RE: 1480 rub bars - Redman : 8/7/2006 02:56
  - RE: 1480 rub bars - jwab : 8/7/2006 09:45
    - RE:have used harvest rub bars - Redman : 8/8/2006 00:39

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)