Viewing a thread - stroke/bale counter for square balers

Forums | Classifieds (153) | Skins | Language

You are logged in as a guest. ( logon | register )

stroke/bale counter for square balers	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Iowa Quality Hay

Posted 7/8/2006 11:36 (#24833 - in reply to #24752)
Subject: RE: stroke/bale counter for square balers

Grabill, Indiana

Installation is pretty simple.

I welded the washer to one of the top hay dogs under the knotter on my NH 273 and the knotter magnet to the needle arm on the right side of the baler. I used a plastic wire loom to protect the wire.

Give me a shout if you need any help.

Jim

stroke/bale counter for square balers - Seth_ia : 7/7/2006 23:32
- RE: stroke/bale counter for square balers - nwksfarmer : 7/8/2006 00:09
  - RE: stroke/bale counter for square balers - Iowa Quality Hay : 7/8/2006 11:36
- RE: stroke/bale counter for square balers - BrentOntario : 7/8/2006 01:32
  - Or try this, - Hay Wilson in TX : 7/8/2006 06:43
    - RE: Or try this, - BrentOntario : 7/9/2006 18:18
  - RE: stroke/bale counter for square balers - Seth_ia : 7/9/2006 21:39
- Haytech Stroke and Bale Counter - Iowa Quality Hay : 7/8/2006 11:33
- Timer - Badger : 7/8/2006 19:09
  - RE: Timer - BrentOntario : 7/9/2006 18:20
- Re: stroke/bale counter for square balers - unifarmor : 1/23/2007 22:54
  - Re: stroke/bale counter for square balers - Freeman fan : 11/3/2013 22:11

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)