AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Envizio & Hardi ?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Pete Bailey
Posted 6/15/2006 20:41 (#19738 - in reply to #19467)
Subject: RE: Envizio & Hardi ?


A latching relay will work but you will also need to run wires out to the boom.

on the boom (usually towards the front on most models) you will find a large white junction box. if you take the lid off you will see 2 boards (3 if you have a hydraulic functions board) on the front board (middle board if 3 boards in the box) you will find pairs of wires hanging from the terminal strip at the bottom of the board. Terminal 18 and 19 are usually the ones for the master.

when the master is turned on +/- voltage will be applied here for 60 seconds, when the master is turned off the voltage is reversed and held for 60 seconds. you should be able to wire in a latching replay that can supply a constat 12 volts for on 0 volts for off from this point.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)