|
| I have successfully done all that but instead of teeing off the raven flowmeter I'm using a serial connection. I'm wondering if this is were the problem is caused. I'm assuming that normally during a serial connection an implement switch in not used because of the master on/off. When I build my multi product configuration and try to use an implement switch it probably thinks that it's not required due to the serial connection and the use of a master on/off. Using it today it appears that the area logging remains on at all times and the rate logging turns on/off with the raven controller. As soon as I add an implement switch I get the error. Maybe if I use a tee cable from the raven flowmeter and connect it to the three ended cable the implement switch connects to it may work. Is there a quick way to make/splice into a raven flowmeter to send the pulse to the Insight??
Thanks in advance.
Mark | |
|