AgTalk Home
AgTalk Home
Search Forums | Classifieds (53) | Skins | Language
You are logged in as a guest. ( logon | register )

Chain and binder for lowboy
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Mitchco
Posted 3/13/2025 12:55 (#11145284 - in reply to #11145247)
Subject: RE: Chain and binder for lowboy


SW OH
You can do it with 3/8, it just takes more of them. Ohio requires tie downs to be equal to or greater than 50% of the load, so 22,000 pounds in your case. The capacity of each tie down is the weakest link. However, if there is no chain involved, just a binder, the value is only 50% of the binder. There is no capacity rating for the attachment point on either end. Also tie down all 4 corners and no more than 10 feet between tie downs per side. You also have to have a separate tie down on the boom. Your state may be different.

I tie mine down with 4, 1/2" binders rated at 16,000 each going from the car body to the trailer crossmember with no chain, and a 3/8 chain over the boom. So 4X16,000 is 64,000, but cut by 50% for no chain is 32,000 which is more than 50% of the 48,000 that mine weighs.

Mitchco
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)